How to Properly Wash and Wax Your Car at Home Using CarCarez Products

With many doing the washing and waxing of their car in their own garage, it's pretty self-fulfilling to do, since when you're done with CarCarez products, it'll be as if a professional has done it. CarCarez has all the basics, starting from the microfiber towels, detailing brushes, and clay bars, and more, for that showroom shine without having to go to a car wash. So, follow these steps to learn how to wash and wax your automobile at home for proper protection as well as a great appearance.

Step 1: Equip Yourself with the Necessary Items

One first requirement is quality tools and car wash products for effective washing and waxing of your car. CarCarez is to provide you with as many choices as possible, including your microfiber wash pads soft on the paint, so that you can clean up every single nook and cranny with your hands, detailing brushes, so you can do the job with precision, and a professional mop to help you get to any and all surface areas of your car to leave the surfaces ready to shine after waxing.

A car wash foam cannon is a great way to blanket the vehicle with a thick, sudsy coat that removes dirt without rubbing. Dry using waffle weave microfiber towels and have some spare microfiber towels on hand in case they're needed to go back over any area.

Step 2: First Rinse and Application of Foam

First, rinse your car with a hose in order to remove all the loose dirt and debris from the surface. Apply a thick layer of foam while using the foam sprayer or car wash foam cannon for effective penetration and break down of grime. In addition, it provides lubrication to the surfaces that would otherwise scratch when washed. The Foam Cannon Car Wash Kit from CarCarez is applied evenly on car surfaces with the help of the same so that no part of it is left untouched.

Allow the foam to sit for a few minutes then scrub all over with a microfiber wash pad on the outside of your car. Be sure to pay special attention to any areas that might have more grime and dirt buildup, but don't scrub too hard as this may cause some micro-scratches.

Step 3: Deep Cleaning with a Clay Bar

After the soap suds are rinsed out, a clay bar is used for cleaning even deeper into the paint. The car care product by CarCarez uses this clay magic to remove actual embedded contaminants from the paint which regular washing will not dislodge. When one is using the clay bar, they should spray some car coating to grease it onto the surface for it to not stick and glide well.

This removes stubborn dirt, leaving the paint smooth, ready for good waxing. Microfiber towels are a necessity when cleaning down the car once you are done claying to ensure not a speck of residue is left on the paint.

Step 4: Drying the Car Properly

Drying your car correctly prevents water spots and prepares the surface for waxing. CarCarez offers shammy towels and waffle weave microfiber towels, which are excellent for quickly absorbing water without scratching. A professional car wash mop can also be helpful for larger vehicles, reaching all areas and leaving the paint dry and ready for the next step.

Step 5: Applying Wax for Protection and Shine

Once the car is dry, it’s time to apply wax for a lasting shine and added protection. Use microfiber applicator pads to apply the wax evenly, working in small sections to ensure full coverage. CarCarez’s SiO2 spray sealant or paint protectant provide an easy-to-apply option that protects your car’s paint against UV rays, water spots, and grime.

For intricate areas and edges, a boar's hair detailing brush helps spread the wax evenly without leaving buildup. Once applied, buff the wax with microfiber detailing towels to reveal a high-gloss finish.

Step 6: Wheels and Trim Care

Wheels and trim need special attention to complete the car detailing process. Use a tire dressing brush and tire shine applicator brush to apply a tire shine product, giving your wheels a clean, glossy look. For dirtier areas, stainless steel bristle brushes or a wire brush car can help lift grime from tough spots without damaging the wheel finish.

To protect and polish metal parts, apply aluminum brightener for an added shine. For plastic parts, a plastic protectant keeps trim looking new and prevents fading from sunlight.

Step 7: Finishing Touches for a Flawless Look

Finally, use a car detailing pump sprayer to give a light misting of car coating spray for that final coat of protection and shine. This repels dirt and moisture and gives your car an extra glossy finish. When doing your final buffing, ensure you are using microfiber towels to give every part of your car a great look.

For all future cleanings, have on hand a heavy-duty snow brush or soft bristle scrub brush; during the winter months, snow and salt easily mar the finish.

Conclusion

Washing and waxing a car may as well be just as simple and rewarding in the garage as when you turn it over to the pros, with the right products in your toolbox. CarCarez.com has everything you need to finish off a professional-quality shine without the expense of a car wash. From microfiber towels and clay bars up to SiO2 spray sealant, and even to foam cannon car wash kits, you'll find everything at CarCarez for the maintenance of that shine off your car and protecting them from the elements. Try out CarCarez products today and relish in the satisfaction of a perfect detailing of your own car within your very own driveway!